Features:
- Check valve controlled by fluid
- For subplate mounting, Mounting pattern to DIN 24 340
-Subplate or screw threaded connection
-With or without leakage port
-With or without pre-opening
-Type with pre-openin9, dampened decompression
-3 opening pressures

Functional description, section

SV and SL valves are hydraulic pilot operated check valves in poppet type design which may be opened to allow flow in either direction.
These valves are used for the isolation of operating circuits under pressure, as safeguard against the lowering of a load when a line break occurs or against creeping movements of hydraulically locked-in actuators.
                       
Basically these valves consist of housing (1), poppet (2), compression spring (3), control spool (4) as well as a pre-opening, as poppet valve (5), optionally.
The valve enables free flow from A to B, in the counter direction the poppet (2) is held on its seat by the system pressure, additionally to the spring force. Through the pressure connection at control port X the control piston (4) is moved to the right. This pushes the poppet (2) from the seat. Now the valve may also have a flow from B to A
In order to ensure the proper opening of the valve via the control piston(4)a certain minimum control pressure is necessary.

Type SV..A.. and SL..A.. (with pre-opening, section 1)
This valve has a additional pre-opening. Through pressure connection at control port X the control piston (4) is pushed to the right.
This first pushes the poppet (5) and then the poppet (2) from the seat. Now the valve may also have a flow from B to A. Because of the pre-opening there is a dampened decompression of the fluid under pressure. Through this possible pressure shocks are avoided.

Type SL-.. (with leakage port, section 2)
The function of this valve is principally the same as the valve SV. The difference is the additional leakage port Y. With this the annulus area of the control piston (4) is separated from port A. The pressure present at port A only effects area A4 of the control piston (4).

Ordering details


Technical data

Type	SV10	SL10	SV15\20	SL15\20	SV25\30	SL25\30
Control volume-port Y	2.2		8.7		17.5
Control volume-port X	-	1.9	-	7.7	-	15.8
Direction of flow	From A to B freely, from B to A when pilot operated
Max. operating pressure	To 31.5
Control pressure	0.5~31.5
Pressure Fluid	Mineral oil or Phospate ester
Temperature range      ℃	-30~+80
Viscosity range        mm²/s	2.8~500
Weight                kg	SV10	SL10	SV15\20	SL15\20	SV25\30	SL25\30
	2.5		4.0	4.5	8.0

Unit Dimensions (dimensions in mm)

Threaded Connection Valve




Subplate Mounting Valve


1.Ports A and B                                                                    10.O-ring
2.Port X                                                                                      For port A and B
3.Name plate                                                                              O-ring 15×3 (Size10)
4. 4 Fixing holes with type SV/SL 20 SV/SL 10 valve                      O-ring 24×3 (Size10)
5. 6 fixing holes with type SV/SL 30 valve                                      O-ring 34×3 (Size10)                      
6.Port Y with valve "SL"                                                          11.For port X and Y
   (with type valve "SV"this port is closed)                                       O-ring 10×2.5 (Size10, 20, 30)
7.Fixing pin
8.Valve with cracking pressure "1"and"2"(dimension L2)
9.Valve with cracking pressure "3"(dimension L3)